A superb bulldog baffie beautifully restored for play. The swing weight is D3 and the length is 42” (107cm).
John Milne was the professional & club maker at Neasden G.C. from 1894 to 1921 during which time he gained a reputation as a fine club maker. His name is clearly stamped to the compact head within the strike band.
The sole is fitted with a full brass plate held in place by six metal screws. The black fibre face insert is secured with 5 wooden plugs. The lead back weight is firmly in place. The face lines have been re cut and the socket joint has been re whipped with black waxed linen thread which has been lightly coated with shellac for added protection.
The head measures:
3.50” (9cm) from toe to heel through the centre of the face.
2.25” (6cm) wide across the centre of the crown.
Just over 1.25” (3cm) deep face including the sole plate.
The straight new shaft has a firm to stiff feel. A new light tan hide grip has been fitted whipped with black waxed linen thread lightly coated with shellac.
Buying Hickory Clubs for Play
This club(s) has been carefully inspected and sympathetically restored to a condition suitable for playing hickory golf. However it is important to remember that the average age of a hickory club is between 80 to 100 years and even older in some cases so you are purchasing an item of golf history, i.e. a golfing antique.
The majority of hickory clubs will be fine for play when handled with care but there are a few that even after being restored can have problems. For example iron heads become loose, shafts can split and socket joints do sometimes break down under the stress of the golf swing, the impact of hitting a golf ball or another hard object such as a stone or practice mat. These are the risks that you must be prepared to accept when playing with hickory clubs and therefore we cannot be held responsible should such damage occur.
GOLF BALLS – Important Advice.
It is always advisable to use a ‘soft feel’ ball when playing hickory golf to help prevent damaging the clubs. Most modern balls have a hard outer coating that can damage the face of a wood and put unnecessary strain on the socket joint. Hard balls can also cause an iron head/hosel to become loose from the wooden shaft. Driving range balls also invariably have a hard outer coating, plus hitting off rubber practice mats can sometimes loosen iron heads. Always practice on a grass surface.
Please refer to New Mesh & Dimple Balls for Hickory Play (see main menu) to view our replica 1920’s style soft feel balls.
Keeping Your Club(s) In Good Condition:
After a round of golf, should your clubs have become wet during play please ensure that you thoroughly clean and dry the heads when arriving home. Applying a thin coat of ‘gun oil’ to the iron heads helps protect against rust forming.
It is advisable to store your hickory clubs in a cool dry place. Too much moisture or heat can affect the hickory shafts, for example the shaft can shrink within the hosel causing the head to become loose. The cooler the environment - the better.
Please refer to the Postal Prices, Payments & Returns page. Orders consisting of more than one club will significantly reduce the postal charge for the added club(s) or other items, i.e. the cost to send 6 or even 8 clubs is virtually the same as for one club so should a friend also wish to make a purchase then combine the orders and save money. Should you wish to take advantage of this saving then please contact me for a postal quote before placing your order on the website.
When the courier arrives please check the condition of the parcel before signing for the delivery. This is most important because the courier will not accept liability for damage if the parcel is signed for in good condition and then a complaint is lodged at a later date.